
TT1100-OHP
Water Sensing Cable for Suspended Pipe
Water Leak Detector
The
TT1100-OHP sensor cable
detects water leaks at any point along the cable length. When used in conjunction with TraceTek monitoring instruments, the cable senses the presence of a water leak, triggers an alarm and pinpoints the location of the leak to within ±1-meter accuracy.
TT1100-OHP is supplied with an absorptive synthetic fiber braid designed to wick water along the cable even when the water leak is dripping from a single small pin hole or crack. The fiber is selected to be rapid drying so that once the leak is located and repaired, the cable will quickly dry and be ready for re-use, in many cases as soon as the pipe repairs are completed.
FEATURES AND BENEFITS
- Early detection of water at any point along its length
- Prevention of water damage
- Real-time alerts
- Easy to install
- Low maintenance
- Has a smooth design that dries quickly.
- Available in factory terminated lengths with pre-installed connectors, 3FT, 10FT, 17FT, 25FT, 50FT, 100FT.
- Can be monitored by Tracetek Module
Length Order | 7.5m | 15m |
Cable core diameter | 5.5 mm (0.22 in) nominal | |
Cable diameter with rope braid | 8.2 mm (0.32 in) nominal | |
Connector diameter | 23 mm (0.92 in) nominal | |
Continuity and signal wires | 2 x 26 AWG with insulation of fluoropolymer | |
Sensing wires | 2 x 30 AWG with jacket of conductive fluoropolymer | |
Carrier | Fluoropolymer | |
Maximum continuous operating temperature | 80 degC | |
Cable color | black with yellow tracer | |
Cable weight (50-ft length) | 5.5 kg / 100 m nominal (3.7 lb / 100 ft nominal) | |
Leak location accuracy | +/– 1 m (3.3 ft) |
TT1100-OHP Product Overview | 02/19/20 |
TT1100-OHP Installation Manual | 02/19/20 |