Water Leak Detector
TT1000 water leak detection cables
(a.k.a. sensing cables) detect the presence of water at any point along their length. Installed with a TraceTek alarm and locating module, the water sensing cable detects water intrusion, triggers an alarm, and pinpoints the location. The cable is available in a variety of lengths to provide as much coverage as needed.
TT1000 leak detection cable is supplied with factory-installed plastic connectors that plug together. The cable is designed for a range of applications, including data center subfloors, telecommunications rooms, HVAC equipment locations, pipes, electrical vaults, storage areas, tanks, and roofs. The cable is small, lightweight, and flexible, allowing easy installation. The smooth design allows for quick drying.
FEATURES AND BENEFITS
- Early detection of water at any point along its length
- Prevention of water damage
- Real-time alerts
- Easy to install
- Low maintenance
- Has a smooth design that dries quickly.
- Small but rugged, TT1000 cable is extremely resistant to abrasion and corrosion
- Available in factory terminated lengths with pre-installed connectors, 3FT, 10FT, 17FT, 25FT, 50FT, 100FT, 165FT.
- Can be monitored by Tracetek Module
|Cable Diameter||0.24 in (6.0mm) nominal|
|Continuity and Signal Wires||2 x 26 AWG with insulation of fluoropolymer|
|Sensing Wires||2 x 30 AWG with jacket of conductive fluoropolymer|
|Maximum continuous operating temperature||174°F (75°C)|
|Cable color||High-visibility yellow|
|Cable weight (50-ft length)||2.3 lbs.|
|Leak size to alarm (tap water)||2 inches maximum at any point along sensing cable; up to 5000 feet maximum system length.|
|Drying time||Cable dries and resets within 15 seconds of removal from standing water.|
|Standard cleaning method||Wipe with clean damp cloth|